Item number ETHER-MODUL-4X-DIGIT

Ethernet I/O Module 4x Digital Input, 4x Open Collector Output, RS-232/422/485

Ethernet I/O module NE2000 compatible
CPU 80188, 40MHz
4 x Digital Input (Wet/Dry Contact)
4 x Open Collector Output, 30VDC
RS-232/422/485, 115200bps
Reverse polarity protection
Watchdog timer
10-30VDC input, 3W consumption
123 x 72 x 33 mm
-25 to +75C (special comp. required)

356.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80188, 40MHz or compatible
Flash 512K bytes
Type Wet Contact,Dry ContactOpen Collector
Operating Temperature -25 °C ~ +75 °C
Watchdog Timer Yes
Status Yes
Ports 10 BASE-T NE2000 compatible Ethernet Controller1 x RS-232 (TXD, RXD, RTS, CTS, GND)1 x RS-422 (TXD+, TXD-, RXD+, RXD-)1 x RS-485 (Data+, Data-)
Input Range +10 VDC ~ +30 VDC (non-regulated)
Consumption 3 W
Dimensions (mm) 123 mm x 72 mm x 33 mm
Storage Temperature -40 °C ~ +80 °C
Humidity 5 to 95 %, non-condensing
Reverse Polarity Protection Yes
Channels 4
Sink/Source (NPN/PNP) Wet:SinkDry: Source
ON Voltage Level Wet: +3.5 VDC ~ +30 VDCDry: Close to GND
OFF Voltage Level Wet: +1 VDC Max.Dry: Open
Load Voltage +30 VDC max.
Load Current 100 mA
Baud Rate 115200 bps Max.
Parity Even, Odd, None
Data Bit 7, 8
Stop Bit 1
EEPROM 2K Bytes
SRAM 384K bytes

Ethernet I/O Module

This Ethernet I/O module connects digital inputs and outputs to a network using a built-in 10BASE-T interface. It is designed for remote monitoring and control of industrial equipment through wet or dry contact signals and open collector outputs.


4x Digital Input · 4x Open Collector Output · 10BASE-T Ethernet · RS-232/422/485


Reliable I/O and Communication Features

  • Digital Inputs - 4 channels supporting wet and dry contact signals
  • Open Collector Outputs - 4 channels for switching loads up to 30VDC
  • Multi-Protocol Serial Port - RS-232, RS-422 and RS-485 in one connector
  • Watchdog Timer - automatic recovery from system faults
  • Reverse Polarity Protection - safeguards the unit against wiring errors


Typical Applications

The module suits industrial environments where remote I/O control over Ethernet is required.

  • Factory automation monitoring
  • Building management systems
  • Remote equipment control
  • Process signal acquisition


A compact and robust solution for integrating digital I/O into Ethernet-based control systems.