Item number ETHIO16DI-2LAN

UA I/O Module with 16 x Digital Input, OPC UA, MQTT, RESTful API, 2-Port Ethernet Switch, PoE 802.3af

16 x digital input (dry contact)
OPC UA Server/Client, MQTT Client
RESTful API via HTTP/HTTPS
2 x RJ-45 10/100 switch, daisy-chain
PoE IEEE 802.3af Class 2
2500 VDC isolation
Logic rules, schedule, event log
Web configuration, HTTPS
32-bit CPU 400 MHz
+12 to +48 VDC, 4.1 W
97 x 120 x 47 mm, DIN-rail
-25 to +75C

434.16 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit CPU (400 MHz)
Operating Temp. -25 °C to +75 °C
Ethernet 2 x RJ-45, 10/100 Base-TX switch ports with daisy-chain and LAN bypass
Features Logic rules (IF, THEN, ELSE) for I/O and virtual points, schedule for executing rules at specific times, event log that records I/O changes for tracking
Isolation 2-way isolation, I/O: 2500 VDC
Luftfugtighed 10 ~ 90% RH, non-condensing
Montering Din-rail mounting
PoE Power supply via PoE, IEEE 802.3af, Class 2
Protokol OPC UA 1.02 Server/Client (Core Server Facet, Data Access Server Facet, Method Server Facet; transport UA-TCP, UA-SC, UA Binary), MQTT Client (MQTT ver. 3.1.1, TLS ver. 1.2, publish/subscribe), RESTful API via HTTP and HTTPS (read/write I/O and virtual po
Rækkevidde 500 m (max.) effective distance for DI cabling
Sikkerhed HTTPS, Port Binding, Allowlist, ICMP drop, ID, password and IP filter
Strømforbrug 4.1 W
Strømforsyning PoE (IEEE 802.3af, Class 2) or +12 ~ +48 VDC via terminal block
Watchdog Module and communication (programmable)
Certificering CE, UKCA, RoHS
Dimensioner 97 x 120 x 47 mm (W x L x H)
LAN ports 2 x RJ-45, 10/100 Base-TX, built-in switch for daisy-chain topology
Wide DC input +12 ~ +48 VDC
Encryption AES-256 encryption of web page configuration data, communication encryption via SSL/TLS, HTTPS, X.509 certificates
Authentication OPC UA user authentication: anonymous, username/password, X.509 certificate; module access with ID and password
Management Built-in web server with web interface for configuration, control and monitoring via browser (no extra software required); supports IoTstar cloud management software from ICP DAS
ESD protection IEC 61000-4-2: ±4 kV contact for each terminal; ±8 kV air for any point
LED indicator Run, Ethernet, I/O
Storage Temperature -30 °C to +80 °C
Reverse Polarity Protection Yes
Input Type Dry contact, source; ON level: closed to GND, OFF level: open; ON state: relay closed, read as 1; OFF state: relay open, read as 0
LAN bypass Yes
Digital inputs 16 x DI channels
Counter frequency 100 Hz, min. pulse width 5 ms, max. counter value 4,294,967,295 (32-bit)
Max. OPC UA sessions 3 simultaneous session connections (server only)
OPC UA security policy None; Basic128Rsa15, Basic256, Basic256Sha256, Aes128Sha256RsaOaep and Aes256Sha256RsaPss (all with Sign and Sign & Encrypt)
EFT protection IEC 61000-4-4: ±4 kV for power line

Ethernet I/O Module with 16 Digital Inputs and PoE

The U-7553M is an Ethernet I/O module that reads 16 dry contact digital inputs and passes the values to SCADA, PLC or cloud systems. It suits system integrators who want to connect field signals over a standard network without a separate gateway. It can be powered from PoE or from a 12-48 VDC supply.

Daisy-Chain Cabling with a Built-In Switch

The two Ethernet ports work as a switch, so modules can be linked in a line instead of each being wired to a central switch. This shortens cable runs and reduces the number of switch ports to buy. With PoE, a module needs no separate power wiring or power socket.

OPC UA, MQTT and RESTful API at the Same Time

The module acts as an OPC UA server or client, an MQTT client and a RESTful API endpoint, and all three can run in parallel. Input values can therefore go to a field control system and to a cloud broker together. Local logic rules with IF, THEN, ELSE conditions and a schedule function can trigger actions without a central controller.

Browser Configuration and Remote Management

Setup, monitoring and I/O status viewing are done in a web browser, with no extra software. An event log records input changes for device tracking, and the module works with IoTstar cloud management software.