Item number HDMI-MULTI-4K-TIP

4K 60Hz HDMI over IP Matrix Transmitter, HDMI 2.0, HDCP 2.2, CAT5E/CAT6 up to 120m, IR, RS-232

4K 60Hz HDMI over IP transmitter
HDMI 2.0, HDCP 1.4/2.2, 18Gbps
Up to 3840x2160@60Hz
1 x HDMI in, 1 x HDMI out, 1 x RJ45
CAT5E 100m / CAT6 120m
Latency 4K@60Hz: 130-200ms
Many-to-many, switch cascading
LPCM 2.0 audio
3.5mm IR in/out, RS-232
-20 to 60C operating temp
DC 5V/2A, max 5.5W
191 x 96 x 25 mm

330.04 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

Audio Audio via HDMI, LPCM 2.0
Operating Temp. -20°C til +60°C
Color Black
Effekt ≤ 5.5 W
Ethernet 1x RJ45 output (HDMI over IP)
HDMI 1x HDMI input, 1x HDMI output (loop-out), HDMI cable length ≤ 5 m
Kabinet Iron
Luftfugtighed 0-90% RH (non-condensing)
Opløsning 4096x2160@24/30Hz, 3840x2160@24/30/50/60Hz, 2560x1440@60Hz, 1920x1200@60Hz, 1080p@50/60Hz, 720p@50/60Hz
Rækkevidde CAT5E 100 m / CAT6 120 m
Strømforsyning DC 5V/2A
Weight 523 g
Dimensioner 191.0 x 96.0 x 25.0 mm (L x W x H)
Videointerface HDMI 2.0
COM ports 1x RS-232 (GND/RXD/TXD), default baud rate 115200, supports 2400, 4800, 9600, 19200, 38400, 57600, 115200
HDCP HDCP 1.4 / HDCP 2.2
ESD protection Contact discharge level 2 (±4KV), air discharge level 3 (±8KV) per IEC61000-4-2
Surge protection Lightning protection, surge protection
Storage Temperature -30°C to +70°C
HDMI bandwidth Max. data rate 18 Gbps
Latency 4K@60Hz: 130-200 ms; 1080p@60Hz: 70-130 ms
Connection types One-to-one connection, many-to-many connection, switch cascading
IR control 1x 3.5 mm IR input, 1x 3.5 mm IR output, IR receiver distance ≤ 5 m, IR frequency 20-60 kHz

4K 60Hz HDMI over IP Transmitter for Matrix Systems

This HDMI over IP transmitter encodes an HDMI source and sends it over standard Ethernet cabling to one or more receivers. It suits system integrators who build video distribution on a network instead of fixed point-to-point cabling.

4K 60Hz Video over Standard Network Cable

The transmitter accepts HDMI 2.0 sources with HDCP 1.4 and 2.2, so protected content passes through. It reaches 100 m over CAT5E or 120 m over CAT6. Latency is 70 to 130 ms at 1080p and 130 to 200 ms at 4K 60Hz, which suits signage and display walls better than interactive use.

One-to-One or Many-to-Many Routing

Through a network switch, one transmitter can feed several receivers, and several transmitters can share one system. Source selection then happens on the network. The 3.5 mm IR input and output and the RS-232 port let you pass remote control signals to the source.