Item number DC24V6.3A

150W 24V Single Output Power Supply with Active PFC, Universal AC Input, Enclosed Case

150W single output power supply
24VDC output, 6.3A
Active PFC, PF>0.93 at 230VAC
Voltage adjust range 22.8-26.4V
Efficiency 85%
Ripple & noise max 150mVp-p
Short/overload/OVP/OTP protection
Optional remote ON-OFF control
-10 to +55C operating temp
85-264VAC / 120-370VDC input
199 x 99 x 50 mm
3 years warranty

95.27 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

Operating Temp. -10°C to +55°C (100% load up to 45°C, derating to 60% at 50°C)
Beskyttelse Short circuit; overload at 105-150% of rated power (constant current limiting, recovers automatically); overvoltage at 26.4-32.4V (output shuts down, restart power to recover); over temperature (output shuts down, recovers automatically when temperature d
Effekt 150W
Indgangsspænding 85-264 VAC / 120-370 VDC (80% load at 85VAC rising linearly to 100% at 115VAC and above)
Isolationsspænding I/P-O/P: 3 kVAC; I/P-FG: 2 kVAC; O/P-FG: 0.5 kVAC
Luftfugtighed 20-90% RH non-condensing (operation)
MTBF 191200 hours min. (MIL-HDBK-217F, 25°C)
Tilslutning 7-pin terminal: Pin 1 AC/L, Pin 2 AC/N, Pin 3 FG, Pin 4-5 DC output -V, Pin 6-7 DC output +V
Udgangsspænding 24V DC (adjustable 22.8-26.4V)
Virkningsgrad 85% (typical)
Certificering UL60950-1, TUV EN60950-1 approved
EMC Emission: EN55032 (CISPR32) Class B, EN61000-3-2, EN61000-3-3. Immunity: EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, light industrial level, criteria A
Vibration 10-500Hz, 2G 10 min./1 cycle, 60 min. in each of the X, Y and Z axes
Weight 0.76 kg (20 pcs./16.4 kg/1.28 CUFT per box)
Dimensioner 199 x 99 x 50 mm (L x W x H)
LED indicator Power-on LED indicator
Input Frequency 47-63 Hz
Storage Temperature -20°C to +85°C, 10-95% RH
Output Current 6300 mA (6.3A), current range 0-6.3A
Input Current 2.5A at 115VAC; 1.2A at 230VAC (typical)
Load Regulation ±0.5%
Insulation resistance I/P-O/P, I/P-FG, O/P-FG: 100 MΩ at 500VDC, 25°C, 70% RH
Number of Outputs 1 output
Ripple and Noise 150mVp-p max. (measured at 20MHz bandwidth with 12" twisted pair wire terminated with 0.1uF and 47uF parallel capacitor)
Voltage Tolerance ±1.0% (incl. setup tolerance, line regulation and load regulation)
Hold-up Time 20 ms at full load (typical)
Inrush Current Cold start 45A at 230VAC (typical)
Warranty 3 years
Line Regulation ±0.5%
Start-up/Rise Time Start-up 700 ms, rise time 40 ms at full load
Switching Frequency Fixed switching frequency: PFC 67 kHz, PWM 134 kHz

150W 24V Single Output Power Supply with Active PFC

This 24V, 150W AC-DC power supply with active PFC is built into equipment such as machines and control systems. It accepts a full-range AC input, so one unit works on both 115V and 230V mains.

Stable 24V Output with Adjustment Range

The 6.3A output holds a voltage tolerance of ±1.0%. The output can be trimmed between 22.8 and 26.4V to compensate for cable losses or to suit connected loads. At full load the unit reaches 85% efficiency, which limits heat inside the enclosure. It delivers its full rating up to 45°C.

Protection and Optional Remote Control

Short circuit, overload, over voltage and over temperature protections are built in. Constant current limiting restricts the output during overload, and the unit recovers automatically once the fault is removed. An optional remote ON-OFF input lets a controller switch the supply on and off. It is covered by a 3-year warranty.