Item number VTL591

Analog Water Leak Sensor for Leak Detection Cable, 2-Wire, 100 m Max Distance, -10 to +80°C

Indoor water leak cable monitor
Analog leak sensor
Detects resistance drop in leak cable
Connects to any analog port
Interface: 2-wire WLC to RJ
Max distance 100 m
Requires WLC leak cable (option)
Operating humidity 5 to 95%
Operating temp -10 to +80C
Power 60 mW
9 x 15 x 3.7 mm (W x D x H)
Weight 0.14 kg

62.31 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Operating Temp. -10°C to +80°C
Anvendelse Indoor leak detection
Interface 2-wire leak cable to RJ
Luftfugtighed 5 to 95%
Rækkevidde Max. distance 100 m
Strømforbrug 60 mW
Tilbehør Requires a separate leak detection cable, available in various lengths
Weight 0.14 kg
Dimensioner 9 x 15 x 3.7 mm (W x D x H)
Measuring Parameters Water/moisture - detects a drop in resistance in the connected leak cable
Input Type Analog sensor connected to an analog port on the monitoring unit or expansion unit

Indoor Water Leak Sensor for Leak Detection Cable

The VT591 is an analog water leak sensor for indoor monitoring, intended for system integrators who add leak detection to an existing monitoring setup. It reacts to a drop in resistance in a connected leak detection cable, so a single sensor can cover a whole cable run instead of one spot.

Works with a Separate Leak Detection Cable

The sensor does not detect water on its own. It needs a WLC leak detection cable, available in lengths of 3, 6, 10, 15 or 25 m (WLC3, WLC6, WLC10, WLC15, WLC25). This lets you match the cable length to the area you need to protect, such as the floor along a rack row or around cooling equipment.

Connects to Any Analog Port

The sensor plugs into any analog port on the monitoring unit or on the VT408 expansion unit. It can be placed up to 100 m from the unit, so it can be installed near the monitored area rather than next to the monitor.