Item number ETH-VPN-GATEWAY

Industrial VPN Router with Firewall and Dual WAN, 5 x Gigabit RJ45, DIN Rail, -40 to 75 °C

Industrial VPN router with SPI firewall and DoS/DDoS protection

VPN: IPsec, SSL (OpenVPN), L2TP, PPTP and GRE with up to 60 tunnels

Dual WAN with automatic failover and load balancing

5 x Gigabit RJ45: 3 x LAN, 1 x WAN and 1 x LAN/WAN

Two redundant 9-48 V DC power inputs with alarm relay

Operating temperature -40 to 75 °C, 6 kV ESD protection

IP30 metal housing for DIN rail or wall

447.83 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Operating Temp. -40 to 75 °C
Alarm Alarm relay on power failure
Andet QoS, VLAN, DMZ, RIP, SNMP, syslog, 6 kV ESD protection
Firewall SPI, DoS/DDoS, SYN/ICMP flood, web/IP/MAC filtering
IP-Tæthed IP30
Montering DIN rail or wall
Porte 5 x Gigabit RJ45 (3 x LAN, 1 x WAN, 1 x LAN/WAN), 1 x USB 3.0
Strømforsyning 2 x 9-48 V DC (redundant), max. 9 W
VPN IPsec, SSL (OpenVPN), L2TP, PPTP, GRE. Up to 60 tunnels and 100 Mbps
Material Metal housing
WWAN Dual WAN with failover and load balancing
Weight 0.53 kg
Dimensioner 50 x 88 x 135 mm (W x D x H)

An industrial VPN router for control cabinets, machines and remote installations that need a secure connection to the internet and to head office. It has a built-in firewall, two WAN ports with automatic failover and VPN, so service technicians and other sites can access the installation securely. The compact IP30 metal housing mounts on DIN rail or wall and operates from -40 to 75 °C.

Security and VPN

The SPI firewall protects against external attacks and blocks DoS and DDoS attacks, and with web, IP and MAC filtering you control what the network may be used for. The router supports IPsec, SSL VPN (OpenVPN), L2TP, PPTP and GRE with up to 60 simultaneous tunnels and up to 100 Mbps VPN throughput, so both sites and individual users can connect securely. Encryption is AES up to 256 bit.

Connections

The router has 5 x Gigabit RJ45: three LAN ports, one WAN port and one port that can be used as LAN or WAN. With two internet connections it shares the traffic (load balancing) or switches automatically if one fails. NAT throughput is up to 900 Mbps, and via the USB 3.0 port the configuration can be backed up and the firmware updated.

Power and mounting

The router has two redundant 9-48 V DC power inputs with reverse polarity protection and an alarm relay that signals a fault if a power supply fails. It uses max. 9 W, has 6 kV ESD protection on the network ports and is tested for shock, vibration and free fall according to IEC 60068. It mounts on DIN rail or wall and is managed via web interface (HTTPS) and SNMP with dashboard and syslog.