Item number X-408-E
Web programmable controller with log, 8 x digital inputs Opto-isolated, I/O mirroring, 24bit counter, P2P, 9 - 28VDC
Web based controller with 8 digital inputs
Digital High is: +4 - +26VDC
8 x digital inputs Opto-isolated
Common ground
200Hz Counter - 24bit
Tasks: 50 Schedule Planned, 50 Conditional, 20 Tuffer Terms
Email Alarms by defined conditions
Supports encrypted e-mail servers such as Gmail
RTC with NTP server synchronization
No software required
Graph (Logged data)
HTTPS / TLS encrypted
Static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: 9 - 28VDC
Dim: 98 x 78 x 36 mm
482.40 €
Excl. VAT
Quantity
Physically in stock
X-408 is ideal for applications that require discreet input monitoring over an IP network. Use X-408 to register the condition of buttons and contacts. Send the status of input to other 400 series controllers (X-400, X-410, etc.) for real-time management of processes.
Monitor on / off mode for push buttons and contacts. By means of peer-to-peer communication (P2P), the module can logically be coupled to I / O on remote modules to control a variety of devices such as door locks or light.
Connect water sensors, float switches, etc. Configure X- 408 to send e-mail / text alarms when the sensor is triggered. Monitor safety sensors such as magnetic door / window sensors, motion sensors, loop detectors and more. Configure X-408 to send e-mail / text alerts when sensors are activated in specific situations O.li.
Use X-408 to monitor photo detectors, end stop switches, counters, etc. in manufacturing processes. Connect Flow sensors to X-408, and configure its control page to show flow in Lliter per minute, etc. In real time.
X-408 can be connected to many different sensor types.
I / O - Mirroring: X-408 can be used in a larger, distributed system. Illustration shows how X-408 works with other ControlByWeb products for I / O mirroring.
24VDC 1.7A (40Watt) power supply from 100-240VAC, DIN rail
AC / DC power supply for DIN rail mounting
100-240V AC, 50 / 60Hz, 1.1A
Output, 24V, 1.7A (40 Watt)
Screw terminal
Adjustable output voltage
Short-circuit, overload and surge protection
Compact dimensions: 40 x 100 x 90 mm
Working temperature: -20-70 ° C
44.89 €
Item number:DC24V1.7A-D
24VDC 60W Power supply from 85VAC-264VAC. 24V / 2.5A, adjustment 21.6-29V, DIN mounting
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
48.91 €
Item number:DC24V2.5A-D
24VDC 60W power supply. Ultra wide AC input from 180VAC-550VAC. 24V/2.5A, Fine adjustment from 24-29V, DIN mounting
AC/DC power supply for DIN rail mounting
AC input: 180 - 550VAC
Power: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage to 24 to 29V
Working temperature: -30 - +85°C
Dimensions: 125 x 102 x 32 mm (H, D, W)
95.94 €
Item number:DC24V2.5A-D+
Other products in the same category:
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.
Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm
378.95 €
Item number:M485-ADRTD3-I
Logic Controller with Data Logger. 1 x RJ45 Ethernet, 1 x RS232, 1 x RS485. Supports XV plug-in I/O board, 12 - 48VDC
The logger / controller with socket for internal I / O expansion bus (eg. Relay module)
is programmed with simple logic functions
IF-THEN-ELSE, AND and OR simplifies the setup
supports SNMP, SMTP , FTP, Modbus RTU and DCON
Ethernet 10/100 / 1000Mbit
setup via the integrated Web server
1 x RS232 ports
1 x RS485 ports
Supply voltage: 12 - 48VDC
712.21 €
Item number:L-CON-LOG
CAN bus repeater. Amplifier and restores correct pulse shape. Up to 800kbps. Opto-isolated. DIN bracket.
CAN Bus Booster
CAN specification 2.0A and 2.0B
ISO 11898-2 standard
Max. Baudrate: 800 Kbps
Jumper for 120Ω Terminal resistance on the CAN bus
2 CAN channels
Automatic Baud Rate
Up to 100 nodes on each CAN port
Removable terminal block
DIN bracket
Supply: 10 - 30vdc
Call +45 56 66 20 20 for price
Item number:M485-CAN-I+
Network Module with Digital I / O Korenix Jeti / O 6550
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
186.80 €
Item number:ETHIO14D8D-K
Programmable Industrial Controller with 8 Digital inputs and 4 Relay outputs
ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module
766.88 €
Item number:RPI-4G-8I4O
HMI 4.3" Controller Panel with touch, RS485 bus, MODBUS RTU, GUI design, C and Ladder. RTC. 12 - 48VDC
4.3" HMI Control panel for I/O modules
LCD color display with touch
Free HMIWorks development tool
Library for useful applications
MODBUS
RS485 serial port
Supply voltage: 12 - 48VDC, 2.5W
Dimensions: 126 x 92 x 29 mm
Wall mounted in wall back piece 86 x 86 mm
Operating temperature: -20 - +50°C
299.89 €
Item number:HMI4.3"SER-I
Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
1,188.98 €
Item number:L-CON-LOG+4G













