Item number X-404-I
Web Enabled Modbus Master Controller with Log, RS485 Modbus RTU, 1-Wire for Temp / Humidity sensors, 9 - 28VDC
Modbus Master Controller for max. 32 Modbus RTU devices
1-wire bus for a maximum of 16 sensors (temp / moisture etc.)
Tasks:
50 schedule planned, 50 conditional
20 Terrul Terms
Email Alarms by defined conditions
Supports encrypted email servers, such as Gmail
RTC with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS / TLS encrypted
static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Robust cabinet for DIN rail / wall
Supply voltage: 9 - 28VDC
776.93 €
Excl. VAT
Quantity
On the way in
Modbus Master controller for eg. Monitoring of RS485 Modbus sensors. The X-404 in the module acts as a web-based modbus master controller and monitor to third-party RS485 Modbus sensors and devices. It can monitor up to 32 RS485 sensors / devices.
A great advantage in Modbus integration is the easy setup, reliability and daisy-chainning functions.
Control settings for all ControlByWeb devices with their various combinations of in- And outputs, can act as a Modbus / TCP slave unit controlled by the X-404-in controller.
Example is liquid level monitoring. Use X-404-I to monitor fluid levels through the module's Modbus protocol. An illustration shows X-404-I connected to MPX Float sensor as well as Modbus Network Display for local monitoring. X-404-I can also be connected to pressure sensors, like PT-500 for other level measurements.
Programming the X-404-in the module is designed to automatically program Modbus sensors when connected without the use of an external power supply or a separate programming module. Email / text alerts can be configured in X-404-I to send email / text alarms when the level reaches the high / low parameters. Enable logging to register the history of sensor modes.
24VDC 60W Power supply from 85VAC-264VAC. 24V / 2.5A, adjustment 21.6-29V, DIN mounting
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
48.91 €
Item number:DC24V2.5A-D
24VDC 60W power supply. Ultra wide AC input from 180VAC-550VAC. 24V/2.5A, Fine adjustment from 24-29V, DIN mounting
AC/DC power supply for DIN rail mounting
AC input: 180 - 550VAC
Power: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage to 24 to 29V
Working temperature: -30 - +85°C
Dimensions: 125 x 102 x 32 mm (H, D, W)
95.94 €
Item number:DC24V2.5A-D+
Other products in the same category:
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.
Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm
378.95 €
Item number:M485-ADRTD3-I
Logic Controller with Data Logger. 1 x RJ45 Ethernet, 1 x RS232, 1 x RS485. Supports XV plug-in I/O board, 12 - 48VDC
The logger / controller with socket for internal I / O expansion bus (eg. Relay module)
is programmed with simple logic functions
IF-THEN-ELSE, AND and OR simplifies the setup
supports SNMP, SMTP , FTP, Modbus RTU and DCON
Ethernet 10/100 / 1000Mbit
setup via the integrated Web server
1 x RS232 ports
1 x RS485 ports
Supply voltage: 12 - 48VDC
712.21 €
Item number:L-CON-LOG
CAN bus repeater. Amplifier and restores correct pulse shape. Up to 800kbps. Opto-isolated. DIN bracket.
CAN Bus Booster
CAN specification 2.0A and 2.0B
ISO 11898-2 standard
Max. Baudrate: 800 Kbps
Jumper for 120Ω Terminal resistance on the CAN bus
2 CAN channels
Automatic Baud Rate
Up to 100 nodes on each CAN port
Removable terminal block
DIN bracket
Supply: 10 - 30vdc
Call +45 56 66 20 20 for price
Item number:M485-CAN-I+
Network Module with Digital I / O Korenix Jeti / O 6550
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
186.80 €
Item number:ETHIO14D8D-K
Programmable Industrial Controller with 8 Digital inputs and 4 Relay outputs
ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module
766.88 €
Item number:RPI-4G-8I4O
HMI 4.3" Controller Panel with touch, RS485 bus, MODBUS RTU, GUI design, C and Ladder. RTC. 12 - 48VDC
4.3" HMI Control panel for I/O modules
LCD color display with touch
Free HMIWorks development tool
Library for useful applications
MODBUS
RS485 serial port
Supply voltage: 12 - 48VDC, 2.5W
Dimensions: 126 x 92 x 29 mm
Wall mounted in wall back piece 86 x 86 mm
Operating temperature: -20 - +50°C
299.89 €
Item number:HMI4.3"SER-I
Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
1,188.98 €
Item number:L-CON-LOG+4G












