Item number PORT-POE-SWITC-10-2

8-Port PoE Switch 10/100Base-TX, IEEE 802.3af, DIN-Rail Unmanaged

8 x RJ45 10/100Base-TX PoE ports
IEEE 802.3af PoE, up to 15.4W/port
Store and forward, wire speed switching
MAC table 1024, 3.2 Gbps bandwidth
Automatic PoE detection and management
Reverse polarity protection
Relay alarm output 2A @ 30VDC
Metal casing, IP30
DIN-rail or wall mounting
18-55VDC input
-40C to +75C (special components required)
DIN: 28 x 160 x 119 mm

402.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-rail mounting or wall mounting (optional)
Isolation 1500 Vrms 1 minute
Operating Temperature 40 °C ~ +75 °C
Status Power, Link/Act, 10/100M, Power Device is detected
Ports 8 x RJ-45, 10/100Base-TX
Input Range +18 VDC ~ +55 VDC
Consumption 0.28 A @ 24 VDC without PD loading6.1 A @ 24 VDC with PD full loading
Dimensions (mm) DIN-rail mounting: 28 x 160 x 119 (W x L x H)Wall mounting: 28 x 199 x 112 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
Casing Metal
Ingress Protection Rating IP30
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1, 2), V- (Pin 3, 6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch

This unmanaged Ethernet switch is built for industrial networks that require stable data transmission and PoE power for connected devices. It is well suited for surveillance, automation and other applications where reliability and ruggedness are essential.


8 x RJ45 10/100Base-TX · IEEE 802.3af PoE · -40C to +75C · DIN-rail/wall mounting


Features that ensure stable operation

  • PoE per port - up to 15.4W with automatic detection and management
  • Store and forward - reliable switching with wire speed performance
  • Rugged metal housing - protects against dust and moisture with IP30
  • Wide temperature range - operation from -40C to +75C in demanding environments
  • Alarm relay - notifies of faults via relay output


Use in industrial networks

The switch fits environments where standard network equipment cannot withstand the physical conditions.

  • PoE surveillance cameras
  • Industrial automation
  • Traffic and infrastructure control
  • Outdoor or unheated installations


A rugged and reliable solution for PoE networking in demanding industrial environments.