Item number DOOR-MAGNET+ETD
Electronic door magnet for 12 / 24VDC 6 Watt. Closed sensor, Reclose timer. Indoor model. Holding power up to 272kg
Electronic door magnet with team power up to 272kg
Gen-Close timer Adjustable from 1 - 80 sec.
Door Closed Sensor - Relay output
Aluminum with epoxy at coil
12VDC or 24VDC, 6Watt
Switching between 12 and 24VDC
No holding power at Voltageless
Magnet: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti magnetic function
Operating temperature: -10 - +55ºC
210.25 €
Excl. VAT
Quantity
On the way in
Specifications
| Operating Temp. | -10 - +55°C |
|---|---|
| Forsyning | Valgfri: 12VDC 0.5A / 24VDC / 0.25A |
| Miljø | Indendørs brug |
| Weight | 2 kg |
| Dimensioner | 250 x 185 x 26 mm |
Electromagnet with adjustable timer - for gates and doors.
The door magnet is used where an electronic locking plate cannot be installed. The door magnet can be used with all access control controls that have relay output. The product contains a powerful magnet that "locks" itself stuck to the piece of metal mounted on the door. When there is voltage on the device, the door cannot be opened. When the access control accepts e.g. a password, it will interrupt the tension.
Holding power: 272kg.
Switches: Can be connected to access control control with relay output and a power button that interrupts the magnet in the time interval timer is adjusted to indicators: A LED can be mounted as a LED, which can be mounted Shows that there is voltage on the magnet
Gen-close timer - adjustable hours from 1 to 80 sec.
24VDC 1.7A (40Watt) power supply from 100-240VAC, DIN rail
AC / DC power supply for DIN rail mounting
100-240V AC, 50 / 60Hz, 1.1A
Output, 24V, 1.7A (40 Watt)
Screw terminal
Adjustable output voltage
Short-circuit, overload and surge protection
Compact dimensions: 40 x 100 x 90 mm
Working temperature: -20-70 ° C
44.89 €
Item number:DC24V1.7A-D
Access control door opening via mobile phone Bluetooth, RFID reader and PIN. With the event logs
Bluetooth BLE 4.2 (Low Energy)
Up to 200 user
With user rights
Up to 1000 event logs in memory
access with RFID tag (EM, 125kHz)
access by PIN code (4-8 digits)
with keypad backlighting
app for the iPhone and Android
Range up to 50 meters
Can be set to open at pressures in the APP or automatically once inside the selected range
With solid state relay - no wear
With vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 152 x 45 x 23 mm
280.06 €
Item number:ADGANG-BT-RFIDKEY
Access control for controlling the electronic door lock via the mobile phone Android APP, Bluetooth
Bluetooth
Up to 196 users
APP for Android - e-access E1196
Range up to 50 meters
Can be set to open by pressing in the APP
Can be set to open automatically when you are within range
Built-in buzzer 85dBA can be activated when the door is open.
When you choose to activate Bi-stable function, you can press down the E button on the screen for a few seconds to activate and keep the door unlocked indefinitely.
Does not save events (no log function)
132.66 €
Item number:ADGANG-BT
Outdoor keypad with RFID/fob reader. Stand-alone access control. 125kHz EM standard 12 - 24VDC
Stand-alone access control in IP68 sealed enclosure
ADGANG20-RFID is a stand-alone access controller that can control an electronic door lock.
Identification: Via keypad or RFID EM card/fob.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID reader: EM type for 125 kHz.
Vandal alarm if the housing is damaged
Relay output with normally open and normally closed function 12VDC or 24VDC / 6Watt
Enclosure: IP68 sealed stainless steel metal enclosure
Technically demanding product - support hours can be purchased as an add-on
101.17 €
Item number:ADGANG20-RFID
Stand-alone access control in IP68 sealed metal enclosure, Mifare at 13.56 MHz
Stand-alone access controller Mifare RFID
Red, yellow and green LED for status indication
Identification: Via keypad or Mifare RFID card.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID reader: Mifare at 13.56 MHz.
Door lock control: Relay output with make and break function, max. 12 Volt / 0.5A.
Enclosure: IP68 sealed stainless steel metal enclosure
Vandal alarm if the housing is destroyed
Technically demanding product - Support hours can be purchased as an add-on
159.73 €
Item number:ADGANG20-RFID-M
Other products in the same category:
Door switch for access control / access system, make contact 36VDC 3A. Cast aluminum housing with button in steel
Door switch for access controls - EXIT button.
make contact by pressing
Contact: NO / COM
Max. 36VDC 3Amp
cast aluminum, steel button
Operating temperature -20 - + 50 ° C
Dimensions: 83 x 32 x 25 mm | Weight: 135g
30.95 €
Item number:KNAP-EXIT
Waterproof electronic door magnet, 12VDC. Stainless steel house. Holding force up to 136 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
173.26 €
Item number:DOOR-MAGNET-170U
Waterproof electronic door magnet, holding force 545 kg, 12 / 24VDC / 6 Watt. Bond-sensor Stainless steel, 100% sealed
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
208.64 €
Item number:DOOR-MAGNET-V12
Waterproof electronic door magnet, 12 / 24VDC switching. Stainless steel, 100% sealed. Holding force up to 363 kg
The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg
240.13 €
Item number:DOOR-MAGNET-V8
















