Item number DOOR-MAGNET-MORT6

Electronic door magnet for 12/24VDC for recessing into frame. Up to 272kg holding force. IP67 also for outdoor installation

Electronic door magnet for sliding doors etc.

Holding force up to 272 kg

With Bond sensor output

Aluminum housing and vandal-proof

Supply voltage for hold: 12VDC or 24VDC, 6 Watts

Switching between 12 and 24VDC

No holding force when de-energized

Operating temperature: -10 - 55°C

Humidity: 0-95% non-condensing

Magnet: 187 x 38 x 27 mm

Door plate: 185 x 38 x 12 mm

Weight: approx. 2kg

Optional Access system - see Accessories

145.26 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

DOOR-MAGNET-MORT6 is designed for recessing into the frame and is therefore suitable for sliding doors. DOOR-MAGNET-MORT6 can be used with all access control controls that have a relay output. The product contains a powerful magnet that "locks" to the piece of metal that is mounted on the door. When there is voltage on DOOR-MAGNET-MORT6, the door cannot be opened. When the access control accepts, for example, a password, it will cut off the power to the magnet coil and the magnet will release, allowing the door to be opened.

Holding force with tension on the coil is up to 272kg.

Connection - 6-wire cable:

12volt DC: red and white are +, black and green are -

24volt DC: red is +, green is -, white and black are connected together

With Bond sensor output - physical contact sensor