Item number DOOR-MAGNET-MI45
Mini door magnet for 24VDC, 4 Watt, automatic switching, IP65 and for outward opening doors. Holding force up to 45kg
Door magnet with holding force up to 45 kg
Aluminum + steel and vandal-proof
Supply voltage for hold: 24VDC, 4 Watt
The door is locked with voltage applied.
No holding force without tension
Operating temperature: -10 - 55°C
Magnet: 70 x 31 x 20 mm
Amateur plate: 60 x 32 x 8 mm
Weight: 300g
Purchase access control - see Accessories
85.09 €
Excl. VAT
Quantity
Physically in stock
Weatherproof electromagnetic holding magnets in various series are specifically designed for doors that require less visible strike with a stylish appearance. Made of stainless steel and sealed with epoxy for weatherproof use. Available for mounting on most surfaces and with a wide range of brackets for easy installation on all types of doors and door frames.
24VDC 1.7A (40Watt) power supply from 100-240VAC, DIN rail
AC / DC power supply for DIN rail mounting
100-240V AC, 50 / 60Hz, 1.1A
Output, 24V, 1.7A (40 Watt)
Screw terminal
Adjustable output voltage
Short-circuit, overload and surge protection
Compact dimensions: 40 x 100 x 90 mm
Working temperature: -20-70 ° C
44.89 €
Item number:DC24V1.7A-D
Access control control of electric door lock via Bluetooth APP up to 20 meters, with RFID reader. 200 users. With event log
Bluetooth BLE 4.2 (low energy)
Up to 200 users
With user rights
Up to 1000 event logs in memory
Access with RFID chip (EM, 125kHz)
With LED indicator
APP for iPhone and Android
APP is Easiprox
Range adjustable from 0 to 20 meters
Can be set to open by pressing in the APP or automatically when you are within range
With solid state relay - no wear and tear
Adjustable re-lock time 1 - 1800 seconds
3 lock mode: Re-lock, always open, always locked.
Vandal alarm
Supply voltage: 12VDC
Dimensions: 120 x 76 x 21 mm
354.43 €
Item number:ADGANG-BT-RFID
Access control door opening via mobile phone Bluetooth, RFID reader and PIN. With the event logs
Bluetooth BLE 4.2 (Low Energy)
Up to 200 user
With user rights
Up to 1000 event logs in memory
access with RFID tag (EM, 125kHz)
access by PIN code (4-8 digits)
with keypad backlighting
app for the iPhone and Android
Range up to 50 meters
Can be set to open at pressures in the APP or automatically once inside the selected range
With solid state relay - no wear
With vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 152 x 45 x 23 mm
280.06 €
Item number:ADGANG-BT-RFIDKEY
Access control for controlling the electronic door lock via the mobile phone Android APP, Bluetooth
Bluetooth
Up to 196 users
APP for Android - e-access E1196
Range up to 50 meters
Can be set to open by pressing in the APP
Can be set to open automatically when you are within range
Built-in buzzer 85dBA can be activated when the door is open.
When you choose to activate Bi-stable function, you can press down the E button on the screen for a few seconds to activate and keep the door unlocked indefinitely.
Does not save events (no log function)
132.66 €
Item number:ADGANG-BT
Access System with Bluetooth for electronic door lock with a request button. Auto open short distance to the door. 1,000 users.
Access is controlled by Smartphones via BT
Equipped with call button to request access
United pushbutton with light
Built in sounder
Up to 1000 users
Different user rights
3 functions: access with BT APP, access via query Exit
one administrator
BT: BLE4.2 (Low Energy)
BT range: up to 50 meters, depending on conditions
Compatibility: Android 5.0 and up, iOS9.0 and up
relay contact: NO / COM / NC (switching relay)
Supply voltage: 12 to 24VDC 1A
Operating temperature: -20 - + 70 ° C
Dimensions: 86 x 86 x 38 mm | material: plastic housing
139.36 €
Item number:ADGANG-PBT
Outdoor keypad with RFID/fob reader. Stand-alone access control. 125kHz EM standard 12 - 24VDC
Stand-alone access control in IP68 sealed enclosure
ADGANG20-RFID is a stand-alone access controller that can control an electronic door lock.
Identification: Via keypad or RFID EM card/fob.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID reader: EM type for 125 kHz.
Vandal alarm if the housing is damaged
Relay output with normally open and normally closed function 12VDC or 24VDC / 6Watt
Enclosure: IP68 sealed stainless steel metal enclosure
Technically demanding product - support hours can be purchased as an add-on
101.17 €
Item number:ADGANG20-RFID
Stand-alone access control in IP68 sealed metal enclosure, Mifare at 13.56 MHz
Stand-alone access controller Mifare RFID
Red, yellow and green LED for status indication
Identification: Via keypad or Mifare RFID card.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID reader: Mifare at 13.56 MHz.
Door lock control: Relay output with make and break function, max. 12 Volt / 0.5A.
Enclosure: IP68 sealed stainless steel metal enclosure
Vandal alarm if the housing is destroyed
Technically demanding product - Support hours can be purchased as an add-on
159.73 €
Item number:ADGANG20-RFID-M
Other products in the same category:
Waterproof electronic door magnet, 12VDC. Stainless steel house. Holding force up to 136 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
173.26 €
Item number:DOOR-MAGNET-170U
Waterproof electronic door magnet, 12 / 24VDC switching. Stainless steel, 100% sealed. Holding force up to 363 kg
The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg
240.13 €
Item number:DOOR-MAGNET-V8
Electronic lock, for mounting on cupboards and doors, holding force approx. 100kg, 12-28VDC
Compact motorized lock with separate pawl
Locked without tension
Releases the locking pawl in case of short-term tension
The pal part has a push-out (5-8mm)
Adjustable delay on relocking 2 to 5 seconds
2 lock inputs
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC, max. 165mA
Dimensions: 60 x 60 x 22mm
110.82 €
Item number:LOCK-CAB12-28V100
Waterproof electronic door magnet, holding force 545 kg, 12 / 24VDC / 6 Watt. Bond-sensor Stainless steel, 100% sealed
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
208.64 €
Item number:DOOR-MAGNET-V12
Mounting bracket for DOOR-MAGNET-V8 for outward-facing door. Extruded aluminium. L-bracket.
Mounting angle for DOOR-MAGNET-V8 for outward-facing door. The angle clamp is mounted on the lower edge of the door frame.
It is very important that the anchor plate is mounted floating suspended and that it can come into 100% contact with the holding magnet.
47.70 €
Item number:DOOR-BRACKET-L400
Electronic strike for door frame. 38 mm monitor function. 12VDC 300mA. Holding force of 450kg.
Electric strike for door frame, with lock monitor, 38 mm
with lock open without excitement
with lock closed without excitement
Force: 450kg
Voltage: 12VDC 300mA polarity independent
Lock Monitor: COM, NC NO output
Buy: DC12V/1A-R-Q
Dim: 202 x 36.5 x 27 mm
93.67 €
Item number:DOORLOCK38M
















