Industrial systems with passive backplane
PCI was first introduced in 1992 by Intel and has since gained widespread adoption across all types of PCs. Today, the next generation has arrived.
The PCI bus replaced the ISA bus, originally introduced by IBM in 1981. At the time, PCI was revolutionary, offering significantly higher bandwidth than ISA and supporting 32-bit operation, whereas ISA was limited to 8 or 16 bits. Later, PCI was expanded to 64-bit versions with speeds of 33, 66, and 133 MHz.
As bandwidth requirements increased—primarily driven by more powerful graphics cards—manufacturers attempted to extend the lifespan of PCI. One example was the AGP bus, which provided up to eight times the theoretical bandwidth of PCI. Later technologies such as PCI-X, ePCI-X, and Infiniband followed. PCI-X and ePCI-X are mainly used in server environments, while Infiniband is not a direct replacement for PCI and is expected to coexist for years.

In the mid-1990s, Intel began developing the PCI Express specification. With the introduction of PCI Express, the AGP bus has largely disappeared from the market, although DANBIT can still supply motherboards with AGP slots.
PCI Express with modern features
PCI Express offers modern features such as Hot Swap, advanced error reporting (required in server environments), scalability, and bandwidth up to 32 times that of PCI—approximately 127 MB/s per lane, resulting in up to 4 GB/s.
Unlike ISA, PCI, PCI-X, and AGP, PCI Express is a serial bus requiring only four traces per lane. A 16x PCI Express slot therefore uses just 64 conductors. Multiple lanes can be combined in a single slot to achieve higher bandwidth, ideal for graphics cards and high-speed network adapters. PCI Express supports full duplex data transfer and operates at 250 MHz in its first generation.
Limitations
There are natural limitations to the number of available lanes. Modern motherboards typically support up to 20 lanes. While 32-lane solutions may appear in the future, 64-lane cards are unlikely due to the requirement for 256 conductors and multilayer PCBs.

PCI Express provides a future-proof platform capable of meeting the demands of Gigabit networking, high-performance graphics cards, and large RAID systems. DANBIT offers PCI Express motherboards as well as PCI-X–based server systems.
For mobile systems, PCI-SIG developed Mini PCI Express. The connector has 52 pins, measures approximately 30 x 56 mm (or 30 x 32 mm for half-length cards), and supports PCI Express, USB 2.0, and SMBUS. Mini PCI Express is commonly used for graphics and wireless network cards.
