Remote Control of a Windows PC Over the Network Without Software
There are many software solutions for remotely controlling a Windows PC over a network, but if the computer does not boot into Windows, the software will not work. In such cases, SW-IP-REMOTE-A can take over.
SW-IP-REMOTE-A connects to the computer via USB or PS/2 and VGA, as well as to the network. It transmits the computer’s video output over the network to the user’s PC. No drivers or additional software installation is required.
On the control side, a Windows PC using Internet Explorer receives and displays the video signal and sends keyboard and mouse input back to the remote computer.
The advantages of a hardware-based solution like SW-IP-REMOTE-A compared to pure software solutions such as VNC Server, Remote Admin, or TeamViewer include:
- No software installation is required on the controlled device, making it compatible with virtually any computer or machine with VGA output and keyboard input.
- Remote access is possible during system startup, including access to BIOS settings.
- The controlled PC does not need to be connected to a public network—only the SW-IP-REMOTE-A unit must be network-connected.

Dynamic DNS Configuration
To control SW-IP-REMOTE-A over the internet, either a static IP address is required on the router, or a DDNS (Dynamic Domain Name Service) can be used, which is most common.
The router contacts the DDNS provider (e.g. dyndns.dk) and reports its current IP address. The DDNS server then associates this IP address with a fixed domain name such as minkonto.dyndns.dk or www.mitdomæne.dk/remote.
To use DDNS, an account must be created with a DDNS provider, and a router port must be forwarded to the internal IP address of the SW-IP-REMOTE-A.
IP Cameras on the Internet
The same DDNS method can also be used for other network-connected devices, such as IP cameras.
