Power over Ethernet (PoE) has evolved into one of the most widely used technologies in industrial networking equipment. PoE makes it possible to deliver both data and power through a single Ethernet cable—an enormous advantage in industrial environments where reliability, space, and installation costs matter.

PoE vs PoE+ vs PoE++ comparison

In this guide, we explain the differences, technical specifications, and typical use cases so you can easily determine which solution fits your setup.


What are PoE, PoE+, and PoE++?

There are three primary PoE standards defined by IEEE:

Standard Name Max watts per port Typical devices
802.3af PoE Up to 15.4 W (approx. 12.95 W at the device) IP cameras, sensors, smaller access points
802.3at PoE+ Up to 30 W (approx. 25.5 W at the device) PTZ cameras, larger access points, panel displays
802.3bt PoE++ / PoE Type 3 & 4 Up to 60–100 W Mini PCs, LED panels, high-power IoT devices

PoE (802.3af) – Great for low-power devices

PoE delivers up to 15.4 watts and is ideal for:

  • Simple IP cameras without motors
  • IoT sensors
  • Intercom systems
  • Small access points
  • Industrial monitoring with low power consumption

Advantage: Compatible with most older equipment.
Disadvantage: Too limited for modern cameras, panels, and embedded hardware.


PoE+ (802.3at) – The most common choice

PoE+ provides up to 30 watts, making it suitable for hardware with motors or higher power requirements:

  • PTZ cameras (pan/tilt/zoom)
  • Enterprise-class access points
  • Video intercom systems
  • Small panel PCs
  • LED devices
  • Industrial gateways

Why PoE+ is popular:
30 watts covers most modern network devices without pushing requirements too high in terms of budget and switch selection.


PoE++ (802.3bt) – The future of PoE (2025 and beyond)

PoE++ is divided into Type 3 (60 W) and Type 4 (up to 90–100 W).

PoE++ is for you if you work with:

  • Embedded PCs and mini computers
  • Panel PCs with larger displays
  • Advanced PTZ cameras with heating elements
  • Edge AI devices
  • Digital signage
  • Industrial HMI solutions

Compatibility and cabling: what to consider

Cabling (Cat5e, Cat6, Cat6A)

  • Cat5e: Often works fine for PoE/PoE+, but may become a limitation for PoE++.
  • Cat6/Cat6A: Strongly recommended for PoE++ due to reduced heat loss.

Backward compatibility

All PoE standards are backward compatible. A PoE++ switch can deliver PoE+ and PoE to devices that require fewer watts.


Which PoE technology should you choose in 2025?

Choose PoE if:

  • you use simple sensors or basic IP cameras
  • you work with older installations

Choose PoE+ if:

  • you want a solution that covers 70–80% of modern equipment
  • you use larger cameras, access points, or HMIs

Choose PoE++ if:

  • you work with embedded PCs, panel PCs, or edge AI
  • you want fewer cables and more flexibility
  • you want to future-proof the network infrastructure

In industrial environments like those Danbit serves, PoE++ is often the right choice in 2025—especially when you want to consolidate power and data into a single system.


Common PoE questions

Can I mix PoE and non-PoE devices on the same switch?

Yes. A PoE port only supplies power to devices that request it via the PoE handshake process.

Is PoE harmful to non-PoE equipment?

No. Switches only deliver power after correct signaling.

Which PoE switch should I choose?

Choose based on:

  • number of ports
  • watts per port
  • total PoE budget
  • whether you expect to upgrade to PoE++ devices

Conclusion: what is the right choice?

For most industrial installations in 2025, we recommend:

  • PoE+ for standard network devices
  • PoE++ for future-proof, high-demand systems such as panel PCs, embedded PCs, and edge AI equipment

PoE technology is becoming increasingly important in industrial digitalization—and with the right solution, you can save time, cabling, and operating costs.