Item number CMI-10GLAN02

CMI Ethernet Module with 2x 10GbE RJ45 LAN, Intel Ethernet Controller X550-AT2

CMI module with 2 x 10GbE LAN
Intel Ethernet Controller X550-AT2
2 x RJ45 ports
10/5/2.5/1GbE data rate per port
CMI (Combined Multiple I/O) interface
Jumbo frames supported
Teaming supported
Compatible with GP Series V
Incl. heatsink, thermal pad, screws
83 x 61.3 x 18.95 mm

Call +45 56 66 20 20 for price
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

Chipset Intel Ethernet Controller X550-AT2
Ethernet 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T (10/5/2.5/1GbE per port), RJ45 connector
Formfaktor CMI module (Combined Multiple I/O interface)
Hastighed Up to 10 Gbit/s (10000 Mbps) per port, supports 10/5/2.5/1GbE
Kompatibilitet Compatible with GP Series V
Dimensioner 83 x 61.3 x 18.95 mm (W x D x H)
Number of ports 2x Intel X550-AT2 10GbE LAN ports (RJ45)
Jumbo Frame Jumbo frames supported
Link Aggregation Teaming supported
Package contents 1x CMI module, 1x heatsink, 1x pack of thermal pads, 1x pack of screws

Dual 10GbE CMI Module with Intel X550-AT2 LAN

The CMI 10GbE LAN module adds two RJ45 Ethernet ports to a compatible system through the CMI (Combined Multiple I/O) interface. It is intended for system integrators who need to extend the network connectivity of an embedded or panel PC without a standard PCIe card. The module is listed as compatible with the GP Series V.

Two 10GbE Ports on Intel X550-AT2

Both ports use the Intel Ethernet Controller X550-AT2 and run over standard RJ45 copper cabling. Each port negotiates 10, 5, 2.5 or 1GbE, so the module can connect to new 10GbE switches and to existing 1GbE or 2.5GbE infrastructure without a media change.

Throughput and Link Management

Jumbo frame support reduces overhead when moving large data blocks, such as image data or bulk transfers. Teaming support allows the two ports to be combined for higher aggregate bandwidth or for redundant network links.