VDSL 2-wire / UTP cable

VDSL 2-wire / UTP cable

VDSL 2-wire / UTP cable
There are 13 products.
Ethernet over 2-wire with 8 ports VDSL2 converter, up to 1km. Built-in 8 port switch, 2 x SFP

REMAINING STOCK


Ethernet over telephone cable 1 x twisted pair cable

VDSL module with 8 port switch and SFP slot

Up to 100Mbps at 300 meters

Up to 1km - automatic speed adjustment

Break the 100 meter limit with a VDSL connection

Transparent data connection

8 port VDSL2 switch with 2 shared RJ45/SFP ports

Purchase ETH-VDSL2ROUTER to create a link

5,900.00 kr
Item numberETH-VDSL2-8
Physically in stock
Ethernet over 2-wire over free telephone wire. network connection up to 1.4 Km

Use 2 ETH-VDSL2+ for an Ethernet connection (bridge)

Up to 1.4 km - automatic speed adjustment

2 pcs. ETH-VDSL2+ creates a transparent connection

It transfers data without changing it - like a network cable

Data speed depends on 2-wire quality and length

2 ETH-VDSL2+ automatically connect to each other.

PoE is NOT transmitted over the 2-wire connection

1 x LAN 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port

1 x VDSL2+ RJ11 female

Splitter for analog telephone connection included

Power supply: 54V/0.74A included

PoE+ PSE (30W) for e.g. Access Point, IP camera.

Prepared for DIN mounting, wall mounting

DIN brackets are purchased separately.

1,900.00 kr
Item numberETH-VDSL2+
On the way in
Ethernet over 2-wire connection with VDSL. 10 / 100Mbit. 4 Ports Switch. Up to 1.4km.

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection

Up to 1.4 km over e.g. old telephone cable with 2 VDSL modules

Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+

Ethernet over 2-wire connection with VDSL

Ideal solution when the network distance is over the 100 meter limit

Ideal solution when a Wifi link is an unstable connection

Provides a transparent data connection

Supply: 5VDC, 2A power supply included

DIP switch: VDSL connection, one must be set to CPE and the other to CO.

Prepared for DIN mounting, wall mounting. DIN brackets are available separately.

SOLD INDIVIDUALLY! Order 2 pieces for a set.

Dimensions: 155 x 86 x 26 mm

1,079.00 kr
Item numberETH-VDSL2+4+
Physically in stock
Ethernet for VDSL2. Up to 1.4 km - DANBIT A / S

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection
Provides a network connection without affecting data
Up to 1.4 km Ethernet bridge over e.g. 2-wire laid down telephone cable
Speed depends on cable and length - up to 90Mbps
Automatically adjusts speed to highest speed
Can also communicate with ETH-VDSL2+4+ (with 4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI/MDI-X port
1 x RJ11 female (pin 3 and 4)
Supply: 5VDC, 2A power supply included
DIP switch: VDSL connection, one must be set to CPE and the other to CO.
Prepared for DIN mounting, wall mounting. Your bracket is purchased separately
SOLD SINGLELY! Order 2 pieces for a set.

1,079.00 kr
Item numberETH-VDSL2+A
Physically in stock
Ethernet over 2-wire connection with VDSL with WiFi - Break the 100 meter limit. Up to 100Mbit

REMAINING STOCK


VDSL2 router with 4 x RJ45 and Wifi

Network connection up to 1.4 km over 2-wire telephone cables

Point to point connection

2 pcs. ETH-VDSL2ROUTER for one connection

1,399.00 kr
Item numberETH-VDSL2ROUTER
Physically in stock
Barox, VDSL2 SFP, 2-wire VDSL2, Ethernet over copper, SFP module, long range VDSL2, industrial networking

2x SFP module for VDSL2Sold as a pair of 2 SFP modules, 1x receiver & 1x transmitter

Mounted in contacts with SFP slot

RJ45 connector (for 2 wires)

Up to 2 km, depending on the cable quality

Temperature: -20°C to 75°C

Power consumption of 3W from SFP port

6,195.00 kr
Item numberCNV-SFP-VDSL2-RC
Physically in stock
Ethernet over PDS cable, RJ45 UTP cable, 500m with data and PoE over the cable. VDSL

Network Extender of RJ45 UTP patch cable
PoE transmitted in the cable from the PSE to the PD
1 x 10 / 100Mbit BASE-TX RJ45
Data rate: 94 - 30Mbps auto-optimization
Auto -negotiation / auto-MDI / MDI-X
PoE Standard: IEEE 802.3at / PoE of
Output: 48-56VDC max. 38 Watt
1 x RJ45 to VDSL + PoE
PoE pin: Pin 1/3/5/7 (+ ) 2/4/6/8 (-)
Distance: 100m m / PoE +, 500m w / PoE, without PoE 1000m
Powered by the 48-56VDC min. 2Amp

3,432.00 kr
Item numberETH-VDSL-UTP+P
Physically in stock
Long Reach Ethernet Extender, VDSL over a point to point RJ45 UTP cable. Up to 80 Mbps at 200 meters,

Transparent Ethernet connection up to 1200 meters
Medium range from 11 - 80 Mbps up to 1200 meters
Long range from 14 - 89 Mbps up to 700 meters
Range depends on cable quality etc.
Note: 2 pcs. to make a connection.
1 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
DIP switch to select Master or Slave mode
Dimensions: 97 x 70 x 26 mm
Cabinet: Metal
Weight: 189g
Supply voltage: 5VDC/2A
Temperature: 0 - +50°C

1,176.00 kr
Item numberETH-VDSL2+AL
Physically in stock
4 CH Long Reach Ethernet VDSL. point to point RJ11/RJ45/Coax. Up to 2km with coax

4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C

1,570.00 kr
Item numberETH-VDSL4+AR
On the way in
VDSL-KIT is Ethernet over STP/UTP RJ45 cable, max. 800m with PoE pass-through. Set with TX and RX

Up to 800 meters - Network extender over RJ45 UTP/STP patch cable

PoE is transmitted in cable from PSE to PD

PoE in to RX, PoE out from RX

1 x 10/100Mbit BASE-TX RJ45 with PoE

Data speed: up to 100Mbit auto-optimization

Auto-optimization / auto-MDI/MDI-X

PoE Standard: IEEE 802.3at/af

PoE Output: 48-56VDC from 15.6 to 67 Watts

1 x RJ45 for VDSL + PoE

PoE in (RX) pin 1/2/4/5(+), 3/6/7/8(-)

PoE out (TX) pin:1,2,4,5(+), 3/6/7/8(-)

Distance: 100m w/PoE+, 500m w/PoE, 1000m without PoE

Purchase power supply from 48-56VDC min. 2Amp

Dimensions: 104 x 70 x 30 mm

3,493.00 kr
Item numberETH-VDSL-KIT+P
Physically in stock
Long Reach Ethernet, VDSL point to point over 2-wire cable, up to 3km

VDSL Extender - transmitter (receiver)

IP over 2-wire connection.

Transparent data.

Automatic speed optimization

Plug & play

Supply voltage: 12VDC

Temperature: -40 to + 60°C

Dimensions: 97 x 85 x 24 mm

1,764.00 kr
Item numberETH-VDSL-EX-3KM
Physically in stock
Ethernet, VDSL point to point over 2-wire cable, up to 600 m, up to 100Mbps

VDSL Extender - transmitter/receiver

NOT WITH POE!

IP over 2-wire connection.

Transparent data.

Automatic speed optimization

Plug & play

Supply voltage: 12 - 24VDC

Temperature: -40 to + 60°C

Dimensions: 97 x 85 x 24 mm

1,031.00 kr
Item numberETH-VDSL-EX
Physically in stock
PoE Extender for 2-wire twisted pair cable, 100Mbps, up to 500 meters. 48-56VDC input

PoE Extender up to 500 meters

Max speed 100Mbps

Automatic speed control

Consists of Local and Remote Module

The connection is twisted-pair 2-wire cable

Local module powered from PoE source or DC input

DC input: 48-56VDC

PoE power: 30 Watts

Dimensions: See drawings

Temperature: -20 - +60°C

935.00 kr
Item numberETH-EXT-POE+
Physically in stock
Showing 1-13 of 13 item(s)