Item number 10-CHANN-RELAY-CONTR

10-Channel Relay Controller with IR Remote, RS-232/RS-485 Modbus RTU

10 x Form C relay SPDT outputs
5A/220VAC RL0,RL1,RL6-RL9
10A/220VAC RL2-RL5
On-board IR receiver, 3.5mm jack input
64 self-defined IR relay commands
32 built-in IR relay commands
RS-232 and RS-485 ports
Modbus RTU Slave protocol
Baud rate up to 115200 bps
Power and relay status indicators
220 x 113 x 48 mm
-25 to +75C (special components required)

345.72 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Type Form C relay SPDT
Operating Temperature 25 ~ +75 °C
Status 1 x Power indication10 x Relay output indicators
Ports RS-232 (TxD, RxD, GND)RS-485 (DATA+, DATA-)
Consumption 6.5W (max)
Dimensions (mm) 220 x 113 x 48 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 95% RH, Non-condensing
Channels 10
Baud Rate 9600, 19200, 38400, 57600, 115200 bps
Data Format Parity: None, Databits: 8, Stopbits: 1
Protocol Modbus RTU Slave
Contact Rating 5A @220VAC for RL0, RL1 & RL6~RL910A @220VAC for RL2 ~ RL5(Operating temperature: 25°C)
Operate Time 10 ms for RL0,RL1 & RL6 ~ RL9,15 ms for RL2 ~ RL5
Release Time 5 ms for RL0, RL1 & RL6 ~ RL910 ms for RL2 ~ RL5
Electrical Endurance 1 × 10^5 OPS
Mechanical Endurance 1 × 10^7 OPS
IR Remote Commands 64 IR commands (#0 ~ #63) corresponding to self-defined relay states.32 IR commands (#192 ~ #223) corresponding to built-in relay states.
NET ID Hardware: 1 ~ 15Software: 1 ~ 247
IR Remote Input 1 x On-board IR receiver1 x 3.5 mm audio jack (for CA-IR-001)

2G/3G Multi Function Controller

This multi function controller is designed for remote control and automation of relay-based systems via infrared signals or serial communication. It is commonly used in industrial installations where reliable multi-channel control is essential.


10 relay channels · IR remote control · RS-232/RS-485 · Modbus RTU


Features that make the difference

  • 10 x Form C relay outputs -flexible control of multiple independent circuits
  • Built-in IR receiver -enables wireless control without extra wiring
  • 64 self-defined IR commands -customize relay states as needed
  • Dual serial communication -supports both RS-232 and RS-485
  • Modbus RTU Slave protocol -easy integration with existing SCADA/PLC systems


Application areas

The controller suits tasks where multiple relays must be controlled simultaneously via remote or serial communication.

  • Industrial automation
  • Building management and access control
  • Remote lighting and ventilation control
  • Integration with Modbus-based systems


With robust relays, dual serial communication and flexible IR control, this controller is the right choice for demanding industrial control tasks.