Item number DC24V-480W-DIN

480W 24VDC Single Output DIN Rail Power Supply, 90-264VAC Input, Active PFC, -20 to 70°C

480W industrial DIN rail power supply
Output: 24VDC, 20A
Voltage adjustment: 24-28V
Efficiency up to 92.5%
Active PFC, PF>0.98 at 115VAC
Protection: short/overload/OV/OT
Fanless, free air convection cooling
-20 to 70C (derating above 50C)
Input: 90-264VAC / 127-370VDC
85.5 x 125.2 x 128.5 mm
DIN rail TS35/7.5 or TS35/15
UL508, TUV EN62368-1 approved

142.04 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

Operating Temp. -20°C to +70°C (100% load up to 50°C, derating to 50% at 70°C; 3.5°C/1000m above 2000m)
Anvendelse Industrial control systems, factory automation, electromechanical equipment
Beskyttelse Short circuit; overload 105-130% of rated power (constant current limiting, shuts down after 3 sec., restarts when power is cycled); overvoltage 29-33V (shuts down output, restarts when power is cycled); over temperature (shuts down output, restarts autom
Effekt 480W
Indgangsspænding 90-264 VAC / 127-370 VDC (universal AC input, full range; 80% load at 90VAC rising to 100% at 100VAC and above)
Kabinet Metalkabinet
Luftfugtighed 20-95% RH non-condensing (operation)
Montering DIN-rail TS35/7.5 or TS35/15 (rail not included)
MTBF Min. 1041.6K hours Telcordia SR-332 (Bellcore); min. 146.8K hours MIL-HDBK-217F (25°C)
Udgangsspænding 24V DC (adjustable 24-28V via +V ADJ potentiometer)
Virkningsgrad 92.5% (typ.)
Certificering UL508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS15598-1, IS13252(Part1)/IEC60950-1 approved; complies with BS EN/EN60204-1
EMC Emission: BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS15936 Class B. Immunity: BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level
Weight 1,5 Kg
Dimensioner 85.5 x 125.2 x 128.5 mm (W x H x D)
Fanless Free air convection cooling
LED indicator DC OK LED
Input Frequency 47-63 Hz
Storage Temperature -40°C to +85°C, 10-95% RH
Output Current 20A nominal (current range 0-20A)
Number of Outputs 1 output (single output)
Ripple and Noise Max. 150mVp-p (measured at 20MHz bandwidth with 12" twisted pair wire terminated with 0.1μF and 47μF parallel capacitor)
Voltage Tolerance ±1.0% (line regulation ±0.5%, load regulation ±1.0%)
Hold-up Time 16 ms at 230VAC / 16 ms at 115VAC at full load (typ.)
Inrush Current 20A at 115VAC; 35A at 230VAC (typ.)
Warranty 3 years

480W 24V Industrial DIN Rail Power Supply, Slim Design

This 480W single-output DIN rail power supply provides 24V DC for industrial control systems, factory automation and electro-mechanical equipment. It is 85.5 mm wide to save space in the cabinet and clips onto TS-35/7.5 or TS-35/15 rails.

Full-Range AC Input with Active PFC

The 90 to 264VAC input lets the same unit run on different mains supplies. Built-in active power factor correction keeps harmonic current within EN61000-3-2 limits. Efficiency of up to 92.5% means less heat inside the cabinet.

Protection for Demanding Loads

The metal housing and free air convection cooling mean there is no fan to wear out or clog with dust. Constant current mode handles overload with inductive or capacitive loads. Short circuit, over voltage and over temperature protection are included. The unit is UL 508 approved for industrial control equipment and carries a 3-year warranty.