PoE Injectors and Splitters

PoE Injectors and Splitters

PoE injectors and splitters supply power to network devices over standard Ethernet cable. An injector adds power to the cable from an external power source, while a splitter does the opposite and extracts power from the cable for a device without built in PoE. These are typically used for cameras, access points and industrial controllers placed where a separate power supply is impractical or unavailable.

Choose based on the PoE standard, since 802.3af delivers up to 15.4W and 802.3at up to 30W. Also consider input voltage, power output and whether the unit needs DIN rail mounting. For outdoor or harsh environments, check the temperature range and any reverse polarity protection.

PoE Injectors and Splitters
There are 5 products.
PoE Injector 802.3af, DIN-Rail, 15.4W, 24VDC Input

IEEE 802.3af PoE injector
1 x RJ45 in, 1 x PoE out
10/100Base-T(X)
PoE power up to 15.4W
PoE voltage +48VDC
Reverse polarity protection
DIN-rail mounting
Plastic casing
18-32VDC input
-40C to 75C operating (special components required)
52 x 86 x 27 mm

127.30 €
Item numberPOE-INJEC-802-3AF
On the way in
Gigabit PoE Injector 802.3at, 30W, DIN-Rail, 18-32VDC

1 x RJ45 In, 1 x PoE Out
10/100/1000Base-T(X)
IEEE 802.3at compliant, up to 30W
PoE Voltage +48VDC
Reverse polarity protection
DIN-Rail mounting, plastic casing
18-32VDC input
1.5A @ 24VDC full loading
-40C to +75C
Storage -40C to +85C
10-90% RH non-condensing
52 x 86 x 27 mm

129.98 €
Item numberGIGAB-POE-INJEC-802
On the way in
Gigabit PoE Injector, IEEE 802.3at, 30W, DIN-Rail, -40-75°C

1 x RJ45 in, 1 x PoE out
10/100/1000Base-T(X)
IEEE 802.3at compliant
PoE power up to 30W
PoE voltage +48VDC
Reverse polarity protection
Input range 46-53VDC
0.7A @ 48VDC full load
DIN-rail mounting
-40C to 75C (special components required)
52 x 86 x 27 mm
Humidity 10-90% RH non-condensing

92.46 €
Item numberGIGAB-POE-INJEC-IEEE
On the way in
PoE Injector IEEE 802.3af, 15.4W, DIN-Rail, Reverse Polarity Protection

PoE Injector (PSE), IEEE 802.3af
1 x RJ-45 in, 1 x PoE out
10/100Base-T(X)
PoE power up to 15.4 W
PoE voltage +48VDC
Reverse polarity protection
Consumption 0.4A @48VDC full load
DIN-Rail mounting, plastic casing
+46-53VDC input range
-40C to +75C (special components required)
52 x 86 x 27 mm

88.44 €
Item numberPOE-INJEC-IEEE-802
On the way in
PoE Splitter (PD) DIN-Rail, 802.3af, 24VDC Output 10W

IEEE 802.3af PoE splitter (PD)
Automatic detection and classification
Power on signal or spare pairs
PoE input 46-54VDC
DC output 24VDC, 10W, 0.42A
DIN-rail mounting
Plastic casing
33 x 107 x 78 mm
-40C to +75C (special components required)
Storage -40C to +85C
Humidity 10-90% RH non-condensing

108.54 €
Item numberPOE-SPLIT-PD-DIN
On the way in
Showing 1-5 of 5 item(s)