Item number CNV-SFP10G-RJ45
10G SFP+ Copper Transceiver, RJ45, 1G/2.5G/5G/10GBASE-T, Cat6a/Cat7, Auto-Negotiation
10G Ethernet SFP+ transceiver
IEEE 802.3an 10 Gigabit standard
RJ45 copper connector
Up to 30 m over Cat6a/Cat7 cable
Supports auto-negotiation
Backward compatible with older networks
Hot-pluggable SFP+ slot
Plug and play installation
0 to 70 degrees C
Contact us regarding compatibility with your Switch
109.21 €
Excl. VAT
Quantity
Physically in stock
Specifications
| Ethernet | IEEE 802.3an 10 Gigabit Ethernet Standard, 10GBASE-T over Cat6a/Cat7 kabel |
|---|---|
| Formfaktor | SFP+ Package |
| Interface | RJ45 Copper connector |
| Rækkevidde | Op til 30m over UTP Cat6a/Cat7 kabel |
| Drifttemperatur | 0~70 degrees C |
10GBASE-T SFP+ Copper RJ45 Transceiver
The 10GBASE-T SFP+ Copper RJ45 Transceiver delivers high-speed 10 Gigabit Ethernet connectivity over standard copper cabling, eliminating the need for costly fiber infrastructure. Designed for enterprises, data centers, and ISPs, it provides a plug-and-play upgrade path to 10G network speeds using existing Cat 6a or Cat 7 cabling. Its compact SFP+ form factor and full backward compatibility make it an exceptionally cost-effective solution for network expansion.
10GBASE-T over Copper · Hot-Pluggable SFP+ Form Factor · Auto-Negotiation for Legacy Compatibility · Up to 30m on UTP Cable
Key Features and Connectivity Benefits
- IEEE 802.3an Compliance - Fully compliant with the 10 Gigabit Ethernet standard for guaranteed interoperability
- RJ45 Copper Connector - Uses the familiar compact RJ45 interface, simplifying installation and reducing cabling costs
- 10G over Cat 6a / Cat 7 - Delivers full 10Gb/s throughput over standard UTP copper cable up to 30 meters
- Auto-Negotiation - Seamless interoperability with legacy Ethernet equipment without manual configuration
- Backward Compatibility - Supports existing network infrastructure via standard RJ45, protecting your prior investment
- Hot-Pluggable Design - Install or replace the transceiver without powering down the host device, minimizing downtime
- Plug and Play Installation - No additional drivers or complex setup required for fast deployment
Ideal Deployment Scenarios
This SFP+ copper transceiver is the ideal solution wherever a cost-effective, short-reach 10G copper uplink is needed without transitioning to fiber. It is particularly well suited for in-rack and top-of-rack connectivity in space-constrained environments.
- Data center server and switch interconnects
- Enterprise network core and distribution layer upgrades
- Cloud computing infrastructure expansion
- ISP and telecom access layer deployments
- Legacy network modernization using existing copper cabling
Technical Specifications
- Package - SFP+
- PHY Standard - IEEE 802.3an 10 Gigabit Ethernet Standard
- Connector Type - RJ45 Copper
- Supported Cable - Cat 6a / Cat 7 UTP
- Maximum Distance - 30m over UTP copper
- Operating Temperature - 0 to 70 degrees C
- Form Factor - Hot-pluggable, hot-swappable SFP+ slot
- Fiber Type - Not applicable (copper interface)
The 10GBASE-T SFP+ Copper RJ45 Transceiver is the most practical and cost-effective way to bring 10 Gigabit speeds to your existing copper infrastructure - with zero fiber investment and instant compatibility with legacy equipment.
Other products in the same category:
10Gbit SFP + module Simplex fiber cable 10GBase-BX, Single Mode, LC, up to 20km
10GBase-BX SFP optical transceiver
To 1-Simplex fiber cable
1 x LC Single Mode 1-core cable
0 ~ 60 ° C
Up to 20km
TX: 1270nm , RX: 1330nm
Note: Reverse TX / RX frequencies at the other end of the fiber
330.04 €
Item number:CNV-SFP10G-S20




